Blower Silencers

Blower Silencers

Blower silencers are required in many applications such as industrial processing and waste water treatment. With a resume that includes over 100,000 blower silencers sold to date, it is safe to say Universal is an industry expert in blower silencing needs.

There is little question that silencers are a necessity on any blower installation. Regardless of the size or speed of the blower, silencers of some type are nearly always used. In the selection of blower silencers, there are two basic considerations:

•  the silencer must be the correct size
•  the silencer must be the proper type for the application

The nominal silencer size need only be based on the gas volume. However, the silencer design must be selected with consideration of the blower size and operating speed.

In a closed blower discharge system, structure-borne noise such as that radiated by pipe wall and silencer shell may be a consideration, particularly where a strict, close-proximity noise specification applies. For these applications, various solutions are available to treat the pipe and shell radiated noise, such that most reasonable specifications may be met. For instance, it is possible to lag the silencer shell externally and reduce any shell noise contribution to below the casing and mechanical noise of the blower and driving machinery.

Case Study

UCI Series Inlet Silencer



Chamber-type inlet silencer for use on sub-critical PLV applications. Available in pipe sizes 8"-30". Smaller sizes use URB Series. Available with side connections and mounting brackets.

Guide to Blower Silencers

RIS Series Inlet Silencer



Combustion chamber-absorptive type inlet silencer for critical PLV applications. Available in pipe sizes 2"-30". Low or high side outlet and mounting brackets available on most sizes.

Guide to Blower Silencers

UCD Series URB/URD Series Discharge Silencers



Chamber-type discharge silencer for use on sub-critical PLV applications. Available in pipe sizes 8"-30". (Smaller sizes use URB Series). Low, high, or opposed side connections and mounting brackets available.

Guide to Blower Silencers

SD Series RD Series Discharge Silencers

Combination chamber-absorptive type discharge silencers for critical PLV applications. Available in pipe sizes 2"-30". Low, high, or opposed side connections and mounting brackets available on most sizes.

Guide to Blower Silencers

 
Copyright © ICOM 2010. All rights reserved.
This page is created by ICOM, the home of CliftonPark.org.
Please report problems to webmaster.